ipw2200/README.ipw2200: needs update ipw2200/ipw2200.c: needs update Index: ipw2200/README.ipw2200 =================================================================== --- 6da3f054f864e7735b1fdfab93cc86b48253407d/ipw2200/README.ipw2200 (mode:100644) +++ uncommitted/ipw2200/README.ipw2200 (mode:100644) @@ -20,9 +20,11 @@ 1.3. Wireless Extension "Private" Methods 1.4. Sysfs Helper Files 2. Ad-Hoc Networking -3. About the Version Numbers -4. Support -5. License +3. Interacting with Wireless Tools +3.1. iwconfig mode +4. About the Version Numbers +5. Support +6. License 1. Introduction @@ -276,8 +278,18 @@ ----------------------------------------------- +3. Interaction with Wireless Tools +----------------------------------------------- + +3.1 iwconfig mode +----------------------------------------------- -3. About the Version Numbers +When configuring the mode of the adapter, all run-time configured parameters +are reset to the value used when the module was loaded. This includes +channels, rates, ESSID, etc. + + +4. About the Version Numbers ----------------------------------------------- Due to the nature of open source development projects, there are @@ -304,8 +316,7 @@ The major version number will be incremeneted when significant changes are made to the driver. Currently, there are no major changes planned. - -4. Support +5. Support ----------------------------------------------- For direct support of the 1.0.0 version, you can contact @@ -317,7 +328,7 @@ http://ipw2200.sf.net/ -5. License +6. License ----------------------------------------------- Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. Index: ipw2200/ipw2200.c =================================================================== --- 6da3f054f864e7735b1fdfab93cc86b48253407d/ipw2200/ipw2200.c (mode:100644) +++ uncommitted/ipw2200/ipw2200.c (mode:100644) @@ -7410,6 +7410,122 @@ ipw_rx_queue_restock(priv); } +#define DEFAULT_RTS_THRESHOLD 2304U +#define MIN_RTS_THRESHOLD 1U +#define MAX_RTS_THRESHOLD 2304U +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + + + +static void ipw_sw_reset(struct ipw_priv *priv, int init) +{ + int band, modulation; + + /* Initialize module parameter values here */ + priv->config = 0; + + /* We default to disabling the LED code as right now it causes + * too many systems to lock up... */ + if (!led) + priv->config |= CFG_NO_LED; + + if (associate) + priv->config |= CFG_ASSOCIATE; + else + IPW_DEBUG_INFO("Auto associate disabled.\n"); + + if (auto_create) + priv->config |= CFG_ADHOC_CREATE; + else + IPW_DEBUG_INFO("Auto adhoc creation disabled.\n"); + + if (disable) { + priv->status |= STATUS_RF_KILL_SW; + IPW_DEBUG_INFO("Radio disabled.\n"); + } + + if (channel != 0) { + priv->config |= CFG_STATIC_CHANNEL; + priv->channel = channel; + IPW_DEBUG_INFO("Bind to static channel %d\n", channel); + /* TODO: Validate that provided channel is in range */ + } + +#ifdef CONFIG_IPW_QOS + ipw_qos_init(priv, qos_enable, qos_burst_enable, + burst_duration_CCK, burst_duration_OFDM); +#endif /* CONFIG_IPW_QOS */ + + switch (mode) { + case 1: + priv->ieee->iw_mode = IW_MODE_ADHOC; + priv->net_dev->type = ARPHRD_ETHER; + + break; +#ifdef CONFIG_IPW_MONITOR + case 2: + priv->ieee->iw_mode = IW_MODE_MONITOR; + priv->net_dev->type = ARPHRD_IEEE80211; + break; +#endif + default: + case 0: + priv->net_dev->type = ARPHRD_ETHER; + priv->ieee->iw_mode = IW_MODE_INFRA; + break; + } + + if (hwcrypto) { + priv->ieee->host_encrypt = 0; + priv->ieee->host_decrypt = 0; + } + IPW_DEBUG_INFO("Hardware crypto [%s]\n", hwcrypto ? "on" : "off"); + + if ((priv->pci_dev->device == 0x4223) || + (priv->pci_dev->device == 0x4224)) { + if (init) + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2915ABG Network " + "Connection\n"); + priv->ieee->abg_ture = 1; + band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND; + modulation = IEEE80211_OFDM_MODULATION | + IEEE80211_CCK_MODULATION; + priv->adapter = IPW_2915ABG; + priv->ieee->mode = IEEE_A|IEEE_G|IEEE_B; + } else { + if (init) + printk(KERN_INFO DRV_NAME + ": Detected Intel PRO/Wireless 2200BG Network " + "Connection\n"); + + priv->ieee->abg_ture = 0; + band = IEEE80211_24GHZ_BAND; + modulation = IEEE80211_OFDM_MODULATION | + IEEE80211_CCK_MODULATION; + priv->adapter = IPW_2200BG; + priv->ieee->mode = IEEE_G|IEEE_B; + } + + priv->ieee->freq_band = band; + priv->ieee->modulation = modulation; + priv->ieee->geography = IEEE80211_GEO_001; + + priv->rates_mask = IEEE80211_DEFAULT_RATES_MASK; + + priv->missed_beacon_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT; + priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT; + + priv->rts_threshold = DEFAULT_RTS_THRESHOLD; + + /* If power management is turned on, default to AC mode */ + priv->power_mode = IPW_POWER_AC; + priv->tx_power = IPW_TX_POWER_DEFAULT; +} + + /* * This file defines the Wireless Extension handlers. It does not * define any methods of hardware manipulation and relies on the @@ -7576,6 +7692,9 @@ return 0; down(&priv->sem); + + ipw_sw_reset(priv, 0); + #ifdef CONFIG_IPW_MONITOR if (priv->ieee->iw_mode == IW_MODE_MONITOR) priv->net_dev->type = ARPHRD_ETHER; @@ -7616,13 +7735,6 @@ } -#define DEFAULT_RTS_THRESHOLD 2304U -#define MIN_RTS_THRESHOLD 1U -#define MAX_RTS_THRESHOLD 2304U -#define DEFAULT_BEACON_INTERVAL 100U -#define DEFAULT_SHORT_RETRY_LIMIT 7U -#define DEFAULT_LONG_RETRY_LIMIT 4U - /* Values are in microsecond */ static const s32 timeout_duration[] = { 350000, @@ -8556,112 +8668,6 @@ return 0; } -static void ipw_sw_reset(struct ipw_priv *priv, int init) -{ - int band, modulation; - - /* Initialize module parameter values here */ - priv->config = 0; - - /* We default to disabling the LED code as right now it causes - * too many systems to lock up... */ - if (!led) - priv->config |= CFG_NO_LED; - - if (associate) - priv->config |= CFG_ASSOCIATE; - else - IPW_DEBUG_INFO("Auto associate disabled.\n"); - - if (auto_create) - priv->config |= CFG_ADHOC_CREATE; - else - IPW_DEBUG_INFO("Auto adhoc creation disabled.\n"); - - if (disable) { - priv->status |= STATUS_RF_KILL_SW; - IPW_DEBUG_INFO("Radio disabled.\n"); - } - - if (channel != 0) { - priv->config |= CFG_STATIC_CHANNEL; - priv->channel = channel; - IPW_DEBUG_INFO("Bind to static channel %d\n", channel); - /* TODO: Validate that provided channel is in range */ - } - -#ifdef CONFIG_IPW_QOS - ipw_qos_init(priv, qos_enable, qos_burst_enable, - burst_duration_CCK, burst_duration_OFDM); -#endif /* CONFIG_IPW_QOS */ - - switch (mode) { - case 1: - priv->ieee->iw_mode = IW_MODE_ADHOC; - priv->net_dev->type = ARPHRD_ETHER; - - break; -#ifdef CONFIG_IPW_MONITOR - case 2: - priv->ieee->iw_mode = IW_MODE_MONITOR; - priv->net_dev->type = ARPHRD_IEEE80211; - break; -#endif - default: - case 0: - priv->net_dev->type = ARPHRD_ETHER; - priv->ieee->iw_mode = IW_MODE_INFRA; - break; - } - - if (hwcrypto) { - priv->ieee->host_encrypt = 0; - priv->ieee->host_decrypt = 0; - } - IPW_DEBUG_INFO("Hardware crypto [%s]\n", hwcrypto ? "on" : "off"); - - if ((priv->pci_dev->device == 0x4223) || - (priv->pci_dev->device == 0x4224)) { - if (init) - printk(KERN_INFO DRV_NAME - ": Detected Intel PRO/Wireless 2915ABG Network " - "Connection\n"); - priv->ieee->abg_ture = 1; - band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND; - modulation = IEEE80211_OFDM_MODULATION | - IEEE80211_CCK_MODULATION; - priv->adapter = IPW_2915ABG; - priv->ieee->mode = IEEE_A|IEEE_G|IEEE_B; - } else { - if (init) - printk(KERN_INFO DRV_NAME - ": Detected Intel PRO/Wireless 2200BG Network " - "Connection\n"); - - priv->ieee->abg_ture = 0; - band = IEEE80211_24GHZ_BAND; - modulation = IEEE80211_OFDM_MODULATION | - IEEE80211_CCK_MODULATION; - priv->adapter = IPW_2200BG; - priv->ieee->mode = IEEE_G|IEEE_B; - } - - priv->ieee->freq_band = band; - priv->ieee->modulation = modulation; - priv->ieee->geography = IEEE80211_GEO_001; - - priv->rates_mask = IEEE80211_DEFAULT_RATES_MASK; - - priv->missed_beacon_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT; - priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT; - - priv->rts_threshold = DEFAULT_RTS_THRESHOLD; - - /* If power management is turned on, default to AC mode */ - priv->power_mode = IPW_POWER_AC; - priv->tx_power = IPW_TX_POWER_DEFAULT; -} - static int ipw_wx_sw_reset(struct net_device *dev, struct iw_request_info *info,